Core Overview
The UP1200+ is a multi-channel, high-power intelligent charger designed for professional users. It aims to solve the problems of low charging efficiency, cumbersome management, and improper battery maintenance faced by multi-battery pack users (such as drone pilots, professional photographers, fire rescue, surveying, agriculture, etc.). The product integrates 1200W total power, eight-channel independent/alternating charging, 3.2-inch color screen interaction, supports connecting up to 8 groups of 2-6S LiPo/LiHv batteries simultaneously, and can intelligently schedule, achieving nearly uninterrupted continuous operation, greatly improving equipment deployment efficiency and battery service life.
Core Technology Advantages
Eight-Channel Architecture
Can connect 8 groups of batteries simultaneously, maximizing equipment utilization and preparation efficiency.
Intelligent Alternating Charging
Supports simultaneously fast charging 2 groups of batteries with up to 25A current (600W per channel), and automatically switches to the next group after charging is complete, achieving assembly-line operation of "charging two while preparing six".
Active Battery Maintenance
One-click start of "Storage Mode" automatically charges or discharges the battery to a safe storage voltage (approx. 3.8V/cell), preventing battery damage due to long-term full charge or discharge.
Fault Self-Check and Skip
The intelligent management system can automatically detect and skip faulty batteries, continuing to charge other normal batteries, preventing the entire charging process from being interrupted due to a single battery problem.
Usage Recommendations
- For regular use, it is recommended not to exceed the battery's rated charging rate.
- After operation, if the battery will not be used within 24 hours, be sure to use "Storage Mode" to adjust the battery voltage to the storage state. This is the most critical habit to extend the life of lithium batteries.
- Please use in a ventilated environment at 0-40℃. During charging, despite intelligent protection, it is still recommended to regularly check the single-cell voltage displayed on the screen to ensure cell balance.
Product Specifications
| Item | Specifications |
|---|---|
| Input Voltage | AC 100-240V (Global) |
| Maximum Charging Power | 1200W (600W x 2 channels simultaneously) |
| Maximum Discharge Power | 80W (40W x 2) |
| Maximum Charging Current | 25A / channel |
| Balance Current | 1.5A / cell |
| Supported Battery Types | LiPo, LiHv (Lithium/High Voltage Lithium) |
| Supported Cell Count | 2-6S (Receiver/Transmitter batteries support 2-3S) |
| Maximum Connection Groups | 8 groups (4 groups on one side) |
| Charging Modes | Balance Charging, Storage (Maintenance) Mode |
| Display Interface | 3.2-inch LCD Color Screen |
| Operating Temperature | 0℃ ~ 40℃ |
| Dimensions/Weight | 270x190x175mm / Approx. 4.71kg |
Frequently Asked Questions (FAQ)
Q1: Can it charge 8 batteries at the same time?
A: It can connect 8 groups of batteries simultaneously, but uses an "alternating charging" mechanism. Each time, 2 groups are charged at full power simultaneously. After these 2 groups are fully charged, it automatically switches to the next 2 groups until all are completed. This ensures that each battery receives the optimal charging power, with efficiency far exceeding traditional single-channel or multi-channel low-power chargers.
Q2: What batteries is it suitable for? Can I use my high-voltage lithium battery?
A: Fully compatible. The UP1200+ supports standard LiPo (Lithium Polymer) and LiHv (High Voltage Lithium) batteries, with cell counts between 2-6 cells. Please correctly select the corresponding battery type on the screen before charging.
Q3: If one battery is faulty, will it affect the charging of other batteries?
A: No. When a battery group is detected to be faulty (e.g., abnormal voltage, excessive internal resistance), the charger will automatically skip that group and continue charging other normal batteries, ensuring the charging task is not interrupted.
